Skip to content

Step-By-Step Guide To Setting Up An AWS Application Load Balancer

Step-By-Step Guide To Setting Up An AWS Application Load Balancer

Are you looking for a way to increase the performance of your web applications on the cloud? Then AWS Application Load Balancer might just be what you need! In this article, we’ll walk through a step-by-step guide on how to setup and configure an AWS Application Load Balancer. So, let’s get started!

For any web application, you need to ensure that it is reliable and can handle the user load. That’s why using an Application Load Balancer (ALB) from Amazon Web Services (AWS) can be beneficial. In this article, we’ll provide a step-by-step guide on setting up and configuring an ALB in your AWS environment – so read on to learn more!

Introduction to AWS Application Load Balancers

An AWS Application Load Balancer is a powerful tool that can help you improve the performance and availability of your web applications. In this guide, we will show you how to set up an AWS Application Load Balancer and configure it to work with your web application.

AWS Application Load Balancers are designed to handle the traffic from multiple web servers and route it to the correct server based on the load balancing algorithm that you choose. There are two types of load balancers: classic and application. Classic load balancers operate at the transport layer (TCP/IP) and can route traffic to any type of web server. Application load balancers operate at the application layer (HTTP/HTTPS) and can only route traffic to web servers that support the HTTP or HTTPS protocols.

To set up an AWS Application Load Balancer, you must first create an Amazon EC2 instance in each Availability Zone where you want to run your web application. We recommend using Amazon Linux AMIs for your EC2 instances because they come with all of the necessary software pre-installed. Once you have created your EC2 instances, you will need to install and configure the AWS CLI on each instance.

The next step is to create an Elastic Load Balancing (ELB) Classic Load Balancer or an ELB Application Load Balancer. To do this, you will need to log into the AWS Management Console and go to the ELB section. From there, you can create a new

What is an AWS Application Load Balancer?

An AWS Application Load Balancer (ALB) is a type of load balancer that routes traffic to your application based on advanced routing criteria, such as the content of the request or the identity of the caller. An ALB can also perform other functions, such as offloading work from your application servers, managing session state, and providing SSL termination.

Benefits of Using an AWS Application Load Balancer

An AWS application load balancer provides a number of benefits for those looking to improve their website or application’s performance. By distributing traffic across multiple servers, an application load balancer can help to reduce the overall load on any one server, improving performance and stability. In addition, an AWS application load balancer can also provide features such as automatic failover in the event of an instance failure, as well as detailed monitoring and logging of all traffic passing through the load balancer.

Step-By-Step Guide to Setting Up an AWS Application Load Balancer

If you’re looking to set up an AWS Application Load Balancer, follow these easy steps:

1. Log in to the Amazon Web Services Management Console and select ‘Load Balancers’ from the list of services.

2. Click on ‘Create Load Balancer.’

3. Select ‘Application Load Balancer’ and click on ‘Create.’

4. Enter a name for your load balancer and select the VPC that you want it to be associated with. Then, click on ‘Configure Security Settings.’

5. Select the security group that you want to use for your load balancer and click on ‘Configure Health Check.’

6. Enter the health check path and choose how often you want the health check to be performed. Then, click on ‘Add Listener.’

7. Select the protocol (HTTP or HTTPS) and enter the port that you want your load balancer to listen on. Then, click on ‘Configure Routing.’

8. Select the target group that you want your load balancer to route traffic to and click on ‘Add to registered’. Repeat this step for each target group that you want to add. Finally, click on ‘Create Load Balancer.’

– Preparing the Environment

When creating an AWS Application Load Balancer, you will first need to prepare your environment. This involves creating an IAM role and policy, a VPC, and subnets.

IAM Role and Policy:

The first step is to create an IAM role and policy. The IAM role will allow the load balancer to access other AWS resources, while the policy will specify what permissions the load balancer has. To create an IAM role and policy:

1. Sign in to the AWS Management Console.
2. Navigate to the IAM console.
3. Click on Roles in the left-hand menu.
4. Click on Create Role.
5. Select Application Load Balancer as the type of Trusted Entity.
6. Click Next: Permissions.
7. Select thepolicy you wish to apply to the role (e.g., AmazonELBAccessPolicy).8 Click Next: Review.9 Enter a role name (e .g., my-load-balancer-role).10 Click Create Role.”

Creating a VPC:
A virtual private cloud (VPC) is a virtual network dedicated to your AWS account.” To create a VPC: 1) Sign in to the AWS Management Console; 2) Navigate to the VPC console; 3) Click on Your VPCs in the left-hand menu; 4) Click on Create VPC;

– Creating the Load Balancer

An Application Load Balancer is a Layer 7 load balancer that routes traffic to your web application based on advanced routing criteria. You can create an Application Load Balancer in the AWS Management Console, using the AWS Command Line Interface, or through SDKs.

To create an Application Load Balancer using the AWS Management Console:

1. Open the Amazon EC2 console at
2. In the navigation pane, choose Load Balancers, and then choose Create Load Balancer.
3. Select Application Load Balancer for your load balancer type. If you’ve already created a Classic Load Balancer, you can’t select this option. For more information, see Choosing a Load Balancer Type.
4. Complete the configuration by doing the following:
5. Under Configure LB behavior, choose how you want to route requests to targets:
6. To route requests based on request headers, path patterns, or other criteria, choose Request routing. For more information about routing options, see Routing Criteria for Your Application Load Balancer (Console). If you’re unsure how to configure request routing at this time or if you plan to use a target group with only one target for now, you can skip this step and add routing later using ModifyLoadBalancerAttributes API operations or by editing the Listeners for your load balancer in the console (or both). Request routing is required if

– Configuring the Target Groups

Configuring the Target Groups

Now that we have our Application Load Balancer set up and running, it’s time to configure the target groups. A target group is a group of resources that you can route traffic to. In our case, we will be routing traffic to our EC2 instances.

To create a new target group, navigate to the “Target Groups” section in the AWS console. Click on “Create Target Group”. Give your target group a name and description. For the “Target type”, choose “Instance”. Under “Protocol”, choose “HTTP”. Leave the other settings as their defaults and click on “Create Target Group”.

Now that our target group has been created, we need to add our EC2 instances to it. To do this, select your target group and click on “Edit Targets”. Click on “Add or remove targets” and then click on the checkboxes next to the EC2 instances that you want to add. Click on “Save” when you are done.

Your target group is now ready to receive traffic from your Application Load Balancer!

– Configuring the Listener Rules

1. Log into the AWS console and navigate to the Load Balancers page.
2. Click on the “Create Load Balancer” button and select “Application Load Balancer”.
3. Give your load balancer a name, select the desired VPC, and ensure that “Enable IPv6” is selected.
4. Select the subnets that you want to associate with your ALB and click on the “Next: Configure Security Settings” button.
5. Select the security groups that you want to associate with your ALB and click on the “Next: Configure Security Groups” button.
6. Configure the listener for your ALB by selecting the protocol (HTTP or HTTPS), entering the port number, and choosing whether to redirect HTTP to HTTPS (if using HTTPS).
7. Click on the “Next: Configure Routing” button.
8. Choose how you want to route traffic to your targets by either creating a new target group or using an existing one.
9. If creating a new target group, give it a name, select its protocol (HTTP or HTTPS), enter its port number, and choose whether to enable health checks.
10. Click on the “Next: Register Targets” button when you are finished configuring your target group settings..

– Testing The Setup

Now that you have your Application Load Balancer set up and ready to go, it’s time to test it out. This can be done in a few ways, but the most common method is to use a tool like Apache JMeter.

JMeter is a free and open source load testing tool that can be used to simulate traffic to your load balancer. To install JMeter, follow these instructions. Once JMeter is installed, you’ll need to create a test plan.

A test plan is simply a series of steps that JMeter will execute when testing your load balancer. In this case, we’ll create a simple test plan that sends 100 requests to our load balancer over a period of 10 seconds.

To do this, open JMeter and add a Thread Group by clicking on the “Add” button and selecting “Threads (Users) > Thread Group”. In the Thread Group settings, set the “Number of Threads (users)” to 100 and the “Ramp-Up Period (seconds)” to 10. This will tell JMeter to send 100 requests over a 10 second period.

Next, we need to add an HTTP Request Sampler by clicking on the “Add” button and selecting “Sampler > HTTP Request”. In the HTTP Request settings, set the “Server Name or IP” field to the DNS name or IP address of your load balancer. Leave all other fields at their default values.



Setting up an AWS Application Load Balancer is a straightforward process that can help you achieve high availability and scalability for your applications. With the step-by-step guide outlined in this article, you will be able to set up your own application load balancer quickly and easily. Now that you know how to do this, it’s time to take advantage of all the benefits an application load balancer has to offer!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
Shield Security